Please Choose:


Free Shipping for Worldwide. No Order Amount Limited
Home Dental Lab Equipment Trimmer 10 inch Abrasive Diamond Disc for Model Trimmer

10 inch Abrasive Diamond Disc for Model Trimmer

10 inch Abrasive Diamond Disc for Model Trimmer
  • AU$179.00
  • Buy 2-4 For AU$170.00 Each And Enjoy 5% off

    Buy 5 For AU$150.00 Each And Enjoy 16% off

  • Please choose a specification

  • - Quantity: +
  • Add To Cart

Note: This item only includes the 10 inch diamond disc for the model trimmer

Below is the description of the model trimmer.
1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve 
2. Connect the waste-disposal tube to the unit 
3. Connect the power cord, and switch on the power switch (O=off, l=on)
4. When braking, it is normal to hear clicking before the sand tablet  stops. If the sand tablet makes unusually loud noises, remove it, 
    and  use the included hex-wrench to adjust the screw on the back cover (18) 
5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, 
    change the  disk. After replacing the disk, make sure to tighten the ring on the  platform 8 (closest to the outside of the sand tablet)
6. SKU: JT-D-19-001
If there is some abnormal noise when working on
Possible reason:① Axon is loosing ② Disc is not plain enough。
How to solve it:①Dissemble the disc⒃ with spanner,make the snap
Ring tightly;② change the disc。
The machine does not work when power on
Possible reason:① fuse get burnt;② motor get burnt;③ switch get wrong。
How to solve it:① change the fuse(22) which inside the socket;② change the motor;③ change the switch.
Voltage: <A>220V/50Hz±10% ,    <B>110V/60Hz±10%
Power: 500W                                    Rotational Speed: 2800 rpm 
Dimensions: 44×35×35cm             Weight of the dental trimmer: 20kg
Ship From Australia
up down