Please Choose:

Free Shipping for Worldwide. No Order Amount Limited
Home Dental Lab Equipment Dental Digital Dust Collector Artificer Room Vacuum Cleaner 370W for Laboratory

Dental Digital Dust Collector Artificer Room Vacuum Cleaner 370W for Laboratory

Dental Digital Dust Collector Artificer Room Vacuum Cleaner 370W for Laboratory
  • AU$336.99
  • Buy 2-4 For AU$320.00 Each And Enjoy 5% off

    Buy 5 For AU$303.00 Each And Enjoy 10% off

  • Please choose a specification

  • - Quantity: +
  • Add To Cart

Both 110V and 220V are available, we will send you the right plug!!


1. This is one brand new updated dust collector, this dust collector win national invention patent (electrical control system) and national newly-applied patent (motor installation fixation configuration).

2. Power on, connect the dust-exhaust (13) with dust-exhaust base (12), connect dust-exhaust pipe (14), that is all.

3. The LED display will begin to record the working hours, it will get alarm after working 400hours. You have to power off and change the carbon brush (4), and clean the air-filter.

4. You'd better clean the dusct-collector bag (10) everyday, empty the dust inside the bag so that the air can go into easily and protect the dust-collector motor well, suggest you change the dust collector bag every two weeks.

5. SKU: JT-D-26C-110 JT-D-26C-220



Voltage: (A) 220V/50Hz ± 10%, (B) 110V/60Hz ± 10%

Power: 370W

Maximum pressure: 17kpa

Airflow amount: 70m/h

Maximum vacuum: -9.8kpa

Maximum noise intensity: -60db

Dimensions: 35 x 20 x 35cm



1X Digital Dust Collector

other accessory


How to clean and change the dust collector bag?

Power off,

open the front cover,

push down the spring board above the dust collector bag,

take off the bag, you can easily clean it or change it.


How to change the carbon-brush?

1. Power off

2. Open the back cover, take off the clectric motor from the electrical control box, open the front door as well, take off the air filter (8) (screw fixation), take off two screws of the motor fixation shelf (9), put out the electric motor (5) and electric motor fixation shelf (9) together.

3. Put out the cable from the carbon-brush shelf (4) located upper of two sides of electric motor, pls use a very sharp item to push the plug, screw off two screws from the carbon-brush shelf, replace it with a new one (Note: change two carbon-brushes at one time).

4. After change the carbbon brush, clean the air filter (8) with a dry brush, you'd better to blow it with dry air from air compressir, then re-set the counter located the back of electrical control box, let it to record the working hours from Zero.



1. Clean the dust-collector bag everyday

2. Change the bag every two weeks

3. Change the carbon-brush every 400 hours and change the air filter.

4. Before you use the dust collector, please remember to take off 4 pieces optional multi-direction castor and dust exhaust, these items are inside the front door of dust collector.




Ship From Australia
up down